Eugene Morrison Stoner

From Gunsopedia
Jump to: navigation, search

Eugene Morrison Stoner
Eugene Stoner.jpg
Born November 22, 1922
Gosport, Indiana
Died April 24, 1997 (aged 74)
Palm City, Florida
Nationality American
Occupation Design engineer, firearms designer
Known for Designing the AR-10, AR-15, M16, and other small arms

Eugene Morrison Stoner (Born November 22, 1922 - April 24, 1997) is the man most associated with the design of the AR-15, which was adopted by the military as the M16. He is regarded by most historians, along with John Browning and John Garand, as one of the United States’ most successful military firearms designers of the 20th century.

Eugene Stoner attended high school in Long Beach and afterwards worked for the Vega Aircraft Company installing armament. During World War II, he enlisted for Aviation Ordnance in the United States Marine Corps and served in the South Pacific and northern China.

In late 1945 he began working in the machine shop for Whittaker, an aircraft equipment company, and ultimately became a Design Engineer. In 1954 he came to work as chief engineer for ArmaLite, a division of Fairchild Engine & Airplane Corporation. While at ArmaLite, he designed a series of prototype small arms, including the AR-3, AR-9, AR-11, AR-12, none of which saw significant production. Their only real success during this period was the AR-7 survival rifle, which was adopted by the United States Air Force.

In 1955, Stoner completed initial design work on the revolutionary AR-10, a lightweight (7.25 lbs.) selective-fire infantry rifle chambered for 7.62 x 51 mm NATO. The AR-10 was submitted for rifle evaluation trials to the US Army’s Springfield Armory late in 1956. In comparison with competing rifle designs previously submitted for evaluation, the AR-10 was smaller, easier to fire on automatic, and much lighter. However it arrived very late in the testing cycle, and the army rejected the AR-10 in favor of the more conventional T44, which would become the M14. The AR-10's design was later licensed to the Dutch firm of Artillerie Inrichtingen, who produced the AR-10 until 1960 for sale to various foreign military forces.

Mikhail Kalashnikov, designer of AK-47 (holding an M16A2) and Eugene Stoner, designer of M16 (holding an AK-47)
At the request of the U.S. military, Stoner's chief assistant, Robert Fremont and draughtsman L. James Sullivan designed the AR-15 from the basic AR-10 design, scaling it down to fire the smaller caliber .223 Remington cartridge. After a lengthy and often rancorous debate, the AR-15 was later adopted by United States military forces as the M16 rifle.

Stoner, stung by reliability complaints due to the AR-10 and AR-15's direct impingement gas operation, turned his attention to the AR-16 design. This was another advanced 7.62 mm rifle, but using a "traditional" push-rod operation and a number of stamped parts to reduce cost. This weapon saw only prototype development, but after adaptation to .223, would go on to have some success (and notoriety) as the Armalite AR-18.

The AR-15 rifle, designed by Stoner.
Stoner left ArmaLite in 1961 to serve as a consultant for Colt. He eventually accepted a position with Cadillac Gage, where he designed the Stoner 62 Weapons System, a modular weapons system that could be reconfigured to be a standard automatic rifle, a light machine gun, a medium machine gun, or a solenoid-fired fixed machine gun. Because ArmaLite had sold Stoner's patent for direct gas operation to Colt, the Stoner Weapons System used a piston-operated gas impingement system, though Stoner himself believed direct gas operation was the ideal method for firearms. Once again, Robert Fremont and L. James Sullivan would take a Stoner design and redesign it for the .223 Remington cartridge, to create the Stoner 63 Weapons System.

Stoner also did work for TRW by designing the TRW 6425 25 mm Bushmaster auto cannon, which was later manufactured by Oerlikon as the KBA.

He co-founded ARES Incorporated of Port Clinton, Ohio, in 1972, but left the company in 1989, after designing the Ares Light Machine Gun, sometimes known as the Stoner 86. It was an evolved version of the Stoner 63. At Ares, he also designed the Future Assault Rifle Concept (FARC).

In 1990, he joined Knight's Armament Company (KAC) to create the Stoner Rifle-25 (SR-25), which currently sees military service as the United States Navy Mark 11 Mod 0 Sniper Weapon System. While at KAC, he also worked on yet another version of the Stoner Weapons System, called the Stoner 96. Among his last designs was the SR-50 rifle.

Weapon designs

Armalite designs other designs

External links

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox