Difference between revisions of "Gerald Bull"

Latest revision as of 15:26, 15 March 2013

Gerald Vincent Bull (March 9, 1928 - March 20, 1990) was a Canadian engineer who developed long-range artillery. He moved from project to project in his quest to economically launch a satellite using a huge artillery piece, to which end he designed the Project Babylon "supergun" for the Iraqi government. Bull was assassinated outside his apartment in Brussels, Belgium. It has been speculated that variously members of the Israeli intelligence agency, the Mossad, the CIA, the British, Chilean, Iraqi or South African government were behind the assassination.^{[1][2][3][4][5]}

[edit] Education

[edit] Early life

Bull was born in North Bay, Ontario, to George and Gertrude Isabelle (nee LaBrosse). Bull was from a family based in the Trenton area and had moved to North Bay in 1903 to start a law firm. LaBrosse was from a family that had helped open the mining areas in the Sudbury and North Bay area, but as a Catholic the two would normally be forbidden from marrying, as Bull was Anglican. The diocese of Sudbury contains a record showing Bull converted to Catholicism on 20 February 1909, and the two married three days later. As a result of these events, Bull's family disowned their son for decades. Over the next few years the couple had a number of children, Bernice Gwendolyn Florence, Henry, Philis, Charles Esmond, Clyde, Vivian, Ronald, Frank, Gerald, and finally Gordon and Victor Sanchez

Bull's firm was successful in North Bay, and he was offered the position of King's Counsel on 9 March 1928. His personal wealth was further increased by the inheritance of several family properties in Trenton. The family was well off, and Bull was able to make investments for their future; however, all this was changed as the result of the Wall Street Crash of 1929 and ensuing Great Depression. Northern Ontario, having only recently "opened" through mining, suffered the crash particularly hard, and 80% of the businesses in North Bay failed. Within a year the loans Bull had taken to buy stocks on margin were called in, and the family was forced to move to Toronto to look for work.

The next year Gertrude suffered complications while giving birth to Gordon, and fell ill. Five weeks later she died on 1 April 1931. George suffered a nervous breakdown and started to drink heavily, returning to Trenton and leaving his children in the care of his sister Laura, a retired nurse. As George gave up drinking and started looking for work again, Laura fell victim to cancer and died in the summer of 1934. The next year, the banks foreclosed on the family home. The same year, George, at the age of 58, met and married Rose Bleeker, and returned to Toronto with her, giving up the children to various relatives, Gerald ending up with his older sister, Bernice.

In the summer of 1938, Gerald was sent to spend the holidays with another set of relatives, Philip and Edith LeBrosse. Edith had won the Irish Sweepstakes in 1931 and the couple was relatively well off. Gerald professed little memory of the family, but evidence suggests he wanted to remain with them after the holidays. They had already planned a vacation, however, so Gerald was sent to an all-boys school run by the Jesuit order, Regiopolis College in Kingston. Although too young to attend, for an unknown reason (likely a large donation) he started attending in 1938, returning to spend the summers with the LeBrosses. During this time he took up the hobby of building balsa wood airplanes, eventually of his own design, and was a member of the school's modeling club. The LeBrosses moved to Toronto and Gerry went to a local Catholic school for one term, but returned to board at Regiopolis until graduating in 1944.

[edit] University

After graduating, Bull entered Queen's University, with hopes of eventually entering officer's training school. Philip LeBrosse had bigger plans, and visited the University of Toronto with the intention of having Bull placed there. He wrote to Bull, who was in Kingston, having found room in the medical school. Bull declined the offer and instead asked LeBrosse if a position in the new aeronautical engineering course was available. Brand-new, the department had few hard and fast rules for entrance, and were willing to interview Bull even though he was only sixteen years old. After meeting him in person he was accepted into the undergraduate program. Records and recollections of both classmates and his professors show little in the way of brilliance; one professor noted that "He certainly didn't stand out". Graduating in 1948 with marks that were described as "strictly average", Bull took a drafting job at A.V. Roe Canada.

Later that year the University opened a new Institute of Aerodynamics (now the Institute for Aerospace Studies) under the direction of Dr. Gordon Patterson. The Institute operated on a shoestring budget and could only afford to employ twelve students, accepting three a year for a four year period funded by the Defence Research Board (DRB). Bull applied and was accepted at Patterson's personal recommendation, as he felt that any lack in academics was made up for by Bull's tremendous energy. Bull was soon partnered up with fellow student Doug Henshaw, and the two were given the task of building a supersonic wind tunnel, at that time a relatively rare device. The two ran out of room to build in, and soon knocked a hole into Patterson's office, slowly encroaching on his space and eventually having to stand on his desk to adjust the device.

Matters improved when the Royal Canadian Air Force donated land adjacent to RCAF Station Downsview to the Institute and the operations were quickly moved. During construction, Bull used the device as the basis for his 15 September 1949 Master's thesis, on the design and construction of advanced wind tunnels. The tunnel was to be featured prominently during the opening of the new Institute grounds, leading to an all-night rush to get it fully operational in time for the presentation, which included Dean Kenneth Tupper who joined after driving by and seeing the lights on. The work was finally completed at 3:30 am, but the team was too exhausted to test it. The next day Air Marshal Curtis pushed the button and nothing happened, but Patterson quickly reached around, pushed harder, and to everyone's relief it worked perfectly.

Bull had by this time largely finished his PhD thesis, on the same topic, when a 1950 request from the DRB asking that the Institute provide an aerodynamicist to help on their Velvet Glove missile project arrived. No money was available for paying the "volunteer", who would have to remain on their normal PhD stipend. Patterson selected Bull for the position. This would lead to a fruitful period of work at the Canadian Armament and Research Development Establishment, or CARDE.

[edit] Career

[edit] CARDE

CARDE, the Canadian Armament and Research Development Establishment, was formed as a joint Canadian-British operation studying artillery and ballistics, in an effort to harness the intellectual resources of Canada, as well as place developing British technology outside of German reach during World War II. Formed up on a Military training area and artillery range outside Valcartier, northwest of Quebec City, CARDE was one of a number of research divisions of the DRB that were well funded in the immediate post-war era. CARDE was researching supersonic flight and a variety of rocket and missile projects when Bull was asked to join. Bull asked to build a wind tunnel for this research, but his suggestions were dismissed as too expensive and he had to do all of his work on paper.

Falling increasingly behind in their calculations, the artillerymen at CARDE suggested that they could solve their problems by firing models out of existing guns in order to gather real-world data. This was Bull's introduction to artillery. A former Ordnance QF 25 pounder (almost certainly a Canadian-built version) was bored out to produce a six-inch smoothbore.^[6] Borrowing an idea developed in England in 1916, cards were placed on holders along the range and scaled models of the missile fired through them. In some ways this technique was superior to wind tunnels, as it allowed for the direct measurement of real-world influences on the trajectory, something that could only be calculated otherwise. On the downside, reducing the collected data to a mathematical trajectory for checking against the theoretical calculations is difficult. The range eventually developed into a 1000-foot long walled and covered trench with cards hung every ten feet down its length.

Bull was at CARDE briefly before returning to the University to defend his thesis in March 1951, at 23 years old becoming the youngest PhD graduate in the Institute's history — a record that remains to this day. He returned to CARDE, now on the DRB's payroll, and continued working on the instrumented guns. On one of these trips, in 1953, he and a friend stopped in Charny after a fishing trip to drop off some of their catch at a local doctor's house. Bull met Noemi "Mimi" Gilbert, the doctor's daughter, and the two soon started dating. Given Bull's work schedule they were rarely able to see each other, but they became engaged in February 1954, and married on 15 July. Dr. Gilbert gave the couple a small house as a wedding gift. Mimi gave birth to their first son, Phillippe, on 3 July 1955, and a second, Michael, in November 1956.

In 1954 Bull decided that a wind tunnel was too important to ignore, even if he could not arrange for funding through the DRB. Instead, he gained the ear of professors at Laval University in Quebec City, and Bull and a number of graduate students started work on a tunnel similar to the one he had earlier built at the UofT. It opened in the summer of 1955 and was capable of speeds up to Mach 4, but cost only $6000, the result of using scrap for most of its parts. ^[7]

Bull's work was brought to the public's attention in a 20 May 1955 Toronto Telegram headline article, Unveil Canadian Gun that Fires 4,550 M.P.H. Missiles. Around this time Bull further improved the data-collection capabilities of the system by developing a telemetry system that could fit in the models. DRB staff thought the idea was unworkable and worked against having it funded, but Bull shuffled his own department's funding and went ahead and developed it anyway. All the parts of Bull's future efforts, smoothbore high-velocity guns, sabots for increasing performance, and hardened electronics, were now complete.

Work on the Velvet Glove ended in 1956, and the DRB turned its attention to anti-ballistic missiles (ABMs). Bull's gun system was not fast enough to be useful in this role, so it was adapted to use a "sabot" to improve its performance. Bull then moved on to hyper-sonics research and the study of infrared and radar cross sections for detection. But as the UK's own research efforts wound down in the Post-War political environment, CARDE's joint UK-Canadian funding was dramatically curtailed, eventually being handed over to the Canadians entirely. Further cuts made by the Canadian government followed. Bull was vocal about this turn of events, calling the Liberal government of the day "second-rate lawyers and jumped-up real-estate salesmen".

During this period CARDE was visited by a US team, including Lieutenant General Arthur Trudeau (NO relation to Pierre), who was extremely impressed with Bull's work. Trudeau was director of US Army Research and Development, and he quickly set up a similar effort at the Aberdeen Proving Ground under the direction of Dr. Charles Murphy. They built an analog of Bull's gun using a 5-inch (130 mm) gun and started test firing it over the Atlantic in 1961. The team used a fire-control radar from a Nike Hercules missile battery to track the shells, which released a cloud of chaff at altitudes up to 130,000.

Around the same time, Bull and Murphy started discussing the idea of firing scale aircraft models from their guns. Both started working on the idea, but Bull beat Murphy when he successfully fired a model of the Gloster Javelin from his gun and managed to take shadowgraph photos of it clearly showing supersonic shock cones. Bull then used the same method to work on the Avro Arrow, discovering an instability that led to the use of a stability augmentation system. However, work on the Arrow was soon cancelled in infamous fashion, which angered Bull.

With attention turning to space after the launch of Sputnik in 1957, Bull leaked a story that Canada would soon match this feat by placing a high-velocity gun in the nose of a US Army Redstone missile. The story was a complete fabrication, but caused a major stir when it hit the papers on 22 April 1958. After the story broke Prime Minister John Diefenbaker was besieged in the House of Commons press scrum, later dismissing it stating that "There is no foundation whatsoever to the story, not a scintilla of truth to it". A major flap broke out as a result, leading to the dressing down of several of Bull's superiors. When the press was invited to visit CADRE, the Canadian Broadcasting Company broadcast a piece covering much of the work at CADRE on May 11, including lengthy sections on Bull's gun and their work on infrared detection and anti-ballistic missile systems.^[8]

On 1 April 1961 Bull got into an argument with his direct superior over paperwork. Bull wrote out his resignation. A report prepared after his departure stated "...his tempestuous nature and strong dislike for administration and red tape constantly led him into trouble with senior management."

[edit] High Altitude Research Program

Bull had long prepared for this event, and soon re-appeared as a professor at McGill University, which was in the process of building up a large engineering department under the direction of Donald Mordell. Mordell had long maintained links with CADRE and became one of Bull's ardent supporters, in spite of what other professors saw as "second-rate attempts at manipulation" and that "[Mordell] always supported Bull's work… I think sometimes he got pretty tired of supporting Bull." Bull, for his part, appeared to enjoy the new position, and later described it as "a marriage made in heaven". Bull remained in contact with his counterparts in the US and the University of Toronto, and set about equipping the University with the instrumentation it would need to be a leader in the field of aerodynamics.

Several years earlier, while still working at CADRE, Gerald and Mimi had purchased a 2,000-acre (8.1 km²) plot of land on the Québec–Vermont border. Bull donated the land to be used by McGill and turned into a new ballistics lab, a private analog of the CADRE site. Renamed to become "Highwater Station" due to the local village of Highwater, the site was quickly developed under the direction of former British Army colonel Robert Stacy, who bulldozed large sections, built various test facilities and ran power to the site. There they began working with 5" and 7" artillery pieces.

In the fall of 1961 Bull visited Murphy and Trudeau at Aberdeen and was able to interest them in the idea using guns to loft missile components for re-entry research, a task that was otherwise very expensive and time-consuming aboard rockets. They arranged funding for the work under Project HARP (for High Altitude Research Program, not to be confused with HAARP). The US Navy supplied a surplus 16-inch battleship gun, and a contract from the Office of Naval Research paid for the gun to be re-bored into a 16.4-inch smooth bore. The entire contract, excluding shipping, was only $2,000.

The performance of the gun was so great that the Highwater site was too small to support it. McGill had long been running a meteorological station on Barbados and had close connections with the new Democratic Labour Party (DLP), and suggested that it would make an ideal location for the gun to be set up. Bull met with Prime Minister Errol Barrow who became an enthusiastic supporter of HARP, and arranged for a firing site in Foul Bay, on the south-west corner of the island near the Seawell Airport. The guns arrived in early 1962 but could not be put ashore at the site and had to be offloaded 7 miles (11 km) down the coast, and then transported overland via a purpose-built railway that employed hundreds of locals. As the project continued, this figure grew to over 300 permanently employed with the project, and it became a major reason for Barrow's continued support. Bull encouraged the locals to use the project as a stepping-stone to a science or engineering degree of their own, and his efforts were widely lauded in the press.

In January 1962 the first test shot was carried out, firing an empty sabot. The test was completely successful, so a further two similar firings were abandoned and the second firing was made with a dart-like finned projectile named Martlet (after the mythical bird without feet on the McGill University crest). These tests demonstrated several problems, including poor shot-to-shot performance of the decades-old gunpowder, and the fact that the projectile left the barrel so quickly that the powder didn't have time to burn completely. New charges using modern powder were soon supplied, and by November 1962 the 150-kilogram Martlets were being fired at over 10,000 ft/s (3,048 m/s) (6,818 mph) and reaching altitudes of 215,000 ft (66,000 m).

The Martlets evolved through this period, growing in size and sophistication. As Bull later put it:

	Martlett 2A was the first high-altitude projectile. It weighted [sic] 225 pounds. The forebody carried electronics, the aftbody carried chemical payloads. It was five inches (127 mm) in diameter, and had a very heavy pusher plate. The actual all-up weight was around 400 to 450 pounds. Then what happened was the Martlet 2C. [It] was the big workhorse, still a five inch (127 mm). Then, towards the end, we came up with the 350 pound vehicle, the same thing, only seven inches in diameter. The idea was to find out what happens in the atmosphere from sunset to sunrise. Remember, nobody gave us grants. We had to produce tropical atmospheric meteorological [data] for the army research office, that's how we got our money. We were trying to measure everything to the top of the atmosphere, which we labeled as a nominal two hundred kilometers. The cost of a launch was about $5,000. We did up to eight a night. We used to do three nights in a row to try to get the data.
— Gerald Bull

The Martlet's electronics triggered the release of the chemical markers at a set altitude. This left a sort of "smoke trail" through the atmosphere that could be used to measure winds aloft by visual means. The chemical was typically triethylaluminum, which burns on contact with air. Loading the shells was a dangerous job that required special handling. The Martlet were also used to release chaff instead of chemicals, allowing tracking via radar. Some shots used additional electronics to measure the magnetic field. Similar firings in support of the upper atmosphere research were made using 5" and 7" guns at Highwater, Alaska, and Wallops Island Virginia.^[9] By the time the program ran down, about 1,000 firings had taken place, and the data collected during HARP represents half of all the upper-atmospheric data to this day.

The Martlet-2 was only a stepping-stone on the way to Bull's real interest, a gun-launched rocket that could reach outer space. The gun had been thoroughly tested and was well past intercontinental ranges, but needed modifying. In the spring of 1963 HARP started experimenting with the Martlet-3, a 7-inch diameter "full bore" projectile designed to test the basic problems of launching a solid-fuel artillery shell from guns. Solid shell fuel has the consistency of soft rubber and is cut into a pattern that is open in the middle, so on firing the "grain" would tend to collapse into the cavity. This problem was solved by filling the cavity with zinc bromide, a liquid that had a density close to the fuel which prevented the collapse and was then drained out after firing to allow the shell to light. Test firings began at the US Ballistic Research Laboratory in Aberdeen using a bored-out 175 mm gun from the M107. This program proved the basic concept and shots of the Martlet-3 reached altitudes of 155 miles (249 km).

The ultimate goal of the program was the Martlet-4, a three-stage 16.4" rocket that would be fired from a lengthened gun at Barbados and would reach orbit. In 1964 Donald Mordell was able to convince the Canadian government of the value of the HARP project as a low-cost method for Canada to enter the space-launch business, and arranged a joint Canadian-US funding program of $3 million a year for three years, with the Canadians supplying $2.5 million of that. Another 16.4" gun, mounted horizontally, was being tested at the Highwater range, and was extended by cutting the breech off the end of one gun and welding it to the end of another to produce a new gun over 110 feet long. The extension allowed the powder to be contained for a longer period of time, slowing down the acceleration and loads on the airframe, while also offering higher overall performance. Once the system had been tested at Highwater, a second barrel was shipped to Foul Bay, attached and strengthened with external bracing to allow it to be raised up from the horizontal. This gun was extensively tested in 1965 and 66.

The orbital project faced a constant race with its own budget. Originally guaranteed three years of funding, the money was handled by the DRB, who was less than impressed with its former "star" going on to greater things while their own funding was being dramatically cut. Although the money was allocated for 1964, the DRB managed to delay delivery for ten months, forcing McGill to cover salaries in the interim. These problems did not go unnoticed in the US Army, and in order to ensure that firings would not be interrupted by problems on the Canadian side, a third double-length gun was built at the Yuma Proving Grounds to continue the high-altitude measurements. On November 18, 1966 this gun launched a Martlet-2 to 180 km, a world record that still stands today.^[9]

By 1967 it was becoming clear that the Martlet-4 would not be ready by the time the funding ran out in 1968. An effort started to build a simplified version, the GLO-1A (Gun-launched Orbiter, Version 1A), based on the Martlet-2G.^[10] Continued budget pressures, changing public attitudes towards military affairs, negative reviews from the press and other researchers in Canada and a change of government all conspired to ensure that Canadian funding was not renewed in 1967. Bull had been working on a last-ditch effort to launch a Canadian flag into orbit in time for the Canadian Centennial, but nothing ever came of this plan.

[edit] Space Research Corporation

Bull returned to his Highwater range, and managed to get HARPs assets transferred to a new company by invoking a clause in the original contract with McGill that required them to return the range to its original natural condition. Faced with hundreds of thousands of dollars in construction costs to wind down a project that could not garner funding, McGill was left with little choice but to trade Bull for title to the Highwater equipment.^[9] Setting up a new company, Space Research Corporation (SRC), Bull became an international artillery consultant. Incorporated in both Quebec and Vermont, a number of contracts from both the Canadian and US military research arms helped the company get started.

At SRC Bull continued the development of his high-velocity artillery, adapting the HARP smoothbore into a new "reverse rifled" design where the lands of a conventional rifling were replaced by grooves cut into the barrel to make a slightly larger gun also capable of firing existing ammunition. Normally artillery shells are sealed into the rifling by a driving band of soft metal like copper, which demands that the shell be shaped so that it balances at its widest point, where the band is located. This is not ideal for ballistics, especially supersonically where a higher fineness ratio is desirable. Bull solved this problem by using an additional set of nub "fins" near the front of the shell to keep it centered in the barrel, allowing the driving band to be greatly reduced in size, and located wherever was convenient. Re-shaping the shell for better supersonic performance provided dramatically improved range and accuracy, up to double in both cases, when compared to a similar gun using older-style ammunition. He called the new shell design "Extended Range, Full Bore" (ERFB).

Starting in 1975, Bull designed a new gun based on the common US 155/39 M109 howitzer, extending it slightly to 45 calibres through modifications that could be applied to existing weapons, calling the resulting weapon the GC-45 howitzer. Bull also purchased the base bleed technology being developed in Belgium, which allowed for further improvements in range. With ERFB round the GC-45 could routinely place rounds into 10 m circles at ranges up to 30 km, extending this to 38 km with some loss in accuracy. The gun offered ranges far in excess of even the longest-ranged heavy artillery in a gun only slightly larger than common medium-weight guns.

SRC's first major sales success was the sale of 50,000 ERFB shells to Israel in 1973 for use in American-supplied artillery pieces. The Israelis successfully used a number of 175 mm M107 guns in the counter-battery role against its Soviet counterpart, the 130 mm towed field gun M1954 (M-46), but the introduction of long range rockets fired from Lebanon outranged them. The ERFB shells extended the range of this already formidable weapon to as much as 50 km, allowing the guns to counter-battery even the longest range rockets. Bull was rewarded for success of this program by a Congressional bill, sponsored by Senator Barry Goldwater, making him retroactively eligible for a decade of American citizenship and high-level American nuclear security clearance.

Another early success for SRC was the sale of 30,000 artillery shells, gun barrels, and plans for the GC-45 to Armscor of Pretoria, South Africa. The South African army was using older weapons, notably the British WWII Ordnance QF 25 pounder, that were completely outperformed by Soviet-supplied artillery during the Operation Savannah in 1975-1976, which completely shut down their offensive and resulted in a rout. In order to ensure this would not happen again, they went shopping for longer-ranged weapons and were put in touch with SRC by CIA personnel, their partners in Operation Savannah. Armscor designed a new mounting to allow increased powder loads and added an auxiliary power unit to improve its capabilities in the field by helping automate various tasks and move the gun short distances. The resulting G5 howitzer was vital to the South African campaign against Cuban military forces in Angola, allowing them to stop any attempt to conduct military actions of any size in the border area.

With the change of administration in 1977, the US's policies on arms sales changed dramatically. Combatting communism was no longer the only consideration, and the human rights record of the South African apartheid system became a major concern. Enforcing rules that had always been "on the books", Bull was arrested for illegal arms dealing in violation of the UN arms embargo. Expecting a slap on the wrist, Bull was surprised to find himself spending six months in a US jail in 1980. On his return to Quebec he was sued and fined $55,000 for arms dealing.

[edit] European Poudreries Réunies de Belgique

Bull left Canada and moved to Brussels, where a subsidiary of SRC called European Poudreries Réunies de Belgique was based. Bull continued working with the ERFB ammunition design, developing a range of munitions that could be fired from existing weapons. A number of companies designed upgrades to work with older weapons, like the M114 155 mm howitzer, combining a new barrel from the M109 with Bull's ERFB ammunition to produce an improved weapon for relatively low cost.

Bull also continued working with the GC-45 design, and soon secured work with The People's Republic of China, and then Iraq. He designed two artillery pieces for the Iraqis: the 155 mm Al-Majnoonan, an updated version of the G5, and a similar set of adaptations applied to the 203 mm US M110 howitzer to produce the 210mm Al-Fao with a maximum range of 56 km (35 miles) without base bleed. Although it appears the Al-Fao was not put into production, the Al-Majnoonan started replacing Soviet designs as quickly as they could be delivered. When deliveries could not be made quickly enough, additional barrels were delivered from South Africa.

The guns were built and sold through Austria.

Bull then convinced the Iraqis that they would never be a real power without the capability for space launches. He offered to build a cannon capable of such launches, basically an even larger version of the original HARP design. Saddam Hussein was interested, and work started on "Project Babylon".

A smaller 45-meter, 350 mm caliber gun was completed for testing purposes, and Bull then started work on the "real" PC-2 machine, a gun that was 150 meters long, weighed 2100 tonnes, with a bore of one meter (39 inches). It was to be capable of placing a 2000-kilogram projectile into orbit. The Iraqis then told Bull they would only go ahead with the project if he would also help with development of their longer-ranged Scud-based missile project. Bull agreed.

Construction of the individual sections of the new gun started in England at Sheffield Forgemasters and Matrix Churchill as well as in Spain, the Netherlands, and Switzerland.

[edit] Assassination

A section of the Iraqi supergun at Imperial War Museum Duxford

Bull concurrently worked on the Scud project, making calculations for the new nose-cone needed for the higher re-entry speeds and temperatures the missile would face. At this point someone started "warning" him to stop working on the missiles. Over a period of a few months his apartment was broken into several times but nothing was stolen. He nevertheless continued to work on the project. In March 1990 he was assassinated, allegedly by the Mossad. One account states he was shot five times in the head and back at point blank range while approaching the door of his apartment in Brussels.^[11] Another account states he was shot by a three-man Mossad team on March 20, 1990, when he answered the doorbell.^[3]

Gerald Bull had worked for so many parties in so many critical defence projects that he became an asset and a liability for several powerful groups at the same time.^[12]It has been speculated that variously members of the Israeli intelligence agency, the Mossad, the CIA, the British, Chilean, Iraqi or South African government were behind the assassination.^[1]

The supergun project was stopped when its parts were seized by Customs in the United Kingdom in November 1990, and most of Bull's staff returned to Canada. The smaller test gun was later broken up after the Gulf War.

[edit] Notes

[edit] References

• Murphy CH, Bull GV: "A review of Project HARP". Annals of the New York Academy of Sciences, 1966; vol.140(A1): pp. 337-
• Murphy CH, Bull GV, Edwards HD: "Ionospheric winds measured by gun-launched projectiles". Journal of Geophysical Research, 1966; vol.71(19): 4535-
• Murphy CH, Bull GV, Wright JW: "Motions of an electron-ion cloud released at 100 kilometers from a gun-launched projectile". Journal of Geophysical Research, 1967; vol.72(13): 3511-
• Murphy CH, Bull GV: "Ionospheric winds over Yuma Arizona measured by gun-launched projectiles". Journal of Geophysical Research, 1968; vol.73(9): 3005-
• Murphy CH, Bull GV: "Gun-launched probes over Barbados". Bulletin of the American Meteorological Society, 1968; vol.49(6): 640-
• Murphy CH, Boyer ED, Bull GV: "Gun-launched sounding rockets and projectiles". Annals of the New York Academy of Sciences, 1972 Jan.25; vol.187: 304-
• Murphy, CH, Bull GV, "Paris Kanonen-The Paris Guns"
• William Lowther, Arms and the Man: Dr. Gerald Bull, Iraq, and the Supergun (Presidio, Novato, 1991) (now Doubleday Canada Ltd) Published in England as:
• William Lowther, Iraq and the Supergun: Gerald Bull: the true story of Saddam Hussein's Dr Doom (Macmillan, London 1991) (Pan paperback, London 1992) ISBN 0 330 32119 6
• James Adams, Bull's Eye: The Assassination and Life of Supergun Inventor Gerald Bull (Times Books, New York, 1992)
• David Michaels, Tom Clancy's Splinter Cell (Rubicon, New York, 2004)

[edit] External links

• "The Century's Ballistician"(Caribbean OPC 2003,Angela Cole, Barbados)
• "The Man Who Made The Supergun" -(PBS Frontline, February 12, 1991)
• CBC Digital Archives - Dr. Gerald Bull: Scientist, Weapons Maker, Dreamer
• United Press International: Israel to kill in U.S., allied nations.
• Doomsday gun (a TV movie) at the Internet Movie Database
• Think of The Prestige - article by Bruce Sterling.