Difference between revisions of "Template:Cartridge"

Revision as of 17:53, 29 April 2015

.45 ACP
.45 ACP cartridges
Type	Pistol
Country of Origin	USA
Specifications
Parent Case	parent
Case Type	Rimless, straight
Bullet Ø	.451 in (11.5 mm)
Neck Ø	.473 in (12.0 mm)
Base Ø	.476 in (12.1 mm)
Rim Ø	.480 in (12.2 mm)
Case Length	.898 in (22.8 mm)
Full Length	1.260 in (32.0 mm)
Primer	Large pistol
Production & Service
Designer	John Browning
Design Date	1904 [1]
Production Dates	1905-present
Ballistic Performance Sampling
Bullet Wt./type Velocity Energy 230 gr (15 g) Hydra-Shok JHP 900 ft/s (270 m/s) 414 ft·lbf (561 J) 185 gr (12.0 g) JHP 950 ft/s (290 m/s) 371 ft·lbf (503 J) 230 gr (15 g) JHP 850 ft/s (260 m/s) 369 ft·lbf (500 J) 165 gr (10.7 g) JHP 1,060 ft/s (320 m/s) 412 ft·lbf (559 J) notes would go here

Usage

To use the template, just copy the text below, paste it into the article, and fill in the values...

{{Cartridge
|name= 
|image= 
|caption= 
|origin= 
|type= 
<!-- Specifications -->
|parent=
|case_type=
|bullet=
|neck=
|shoulder=
|base=
|rim_dia=
|rim_thick=
|case_length=
|length=
|rifling= 
|primer=
|max_pressure= 
|max_cup= 
|filling=
|filling_weight=
|detonation=
|yield=
<!-- Production history -->
|designer= 
|design_date=
|manufacturer=
|production_date=
|variants= 
<!-- Service history -->
|service= 
|used_by=
|wars= 
<!-- Ballistic performance -->
|bw1=
|btype1=
|vel1=
|en1=
|bw2=
|btype2=
|vel2=
|en2=
|bw3=
|btype3=
|vel3=
|en3=
|bw4=
|btype4=
|vel4=
|en4=
|bw5=
|btype5=
|vel5=
|en5=
|notes= 
}}

Parameters

General parameters:

• name – the formal name of the cartridge.
• image – optional – an image of the cartridge. The image must be given in the form "Example.jpg"; in particular, the thumb attribute must not be selected.
• caption – optional – the text to be placed below the image.
• origin – the country or place where the cartridge originated or was first manufactured.
• type – the type of cartrige or its designed use (e.g. "Pistol", "Rifle", "Hunting", etc.).

Specifications

• parent – optional – the cartridge that the cartridge was based on, if any.
• case_type – optional – the type of case used for the cartridge (e.g. rimmed, rimless, straight, bottlenecked, etc.).
• bullet – optional – the diameter of the bullet used in the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• neck – optional – the neck diameter of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• shoulder – optional – the shoulder diameter of the cartridge, if any, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• base – optional – the base diameter of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• rim_dia – optional – the rim diamter of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• rim_thick – optional – the rim thickness of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• case_length – optional – the case length of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• length – optional – the overall length of the cartridge, expressed in mm or in; only include the number, and not the units of measurement, and omit any commas.
• case_capacity (may be added later) – optional – the volume of the casing, expressed in cm³ or grains of water; only include the number, and not the units of measurement, and omit any commas.
• rifling – optional – typical rifling to stabilize the bullet fired from the cartridge.
• primer – optional – the type of primer used in the cartridge (e.g. large pistol, small rifle, rimfire, etc.).
• max_pressure' – optional – the maximum chamber pressure of the round, expressed in MPa or psi
• max_cup – optional – the maximum chamber pressure of the round, expressed in CUP
• filling – optional – the explosive filling material of the shell, if any.
• filling_weight – optional – the weight of the explosive material of the shell, if any.
• detonation – optional – for explosive shells, the detonation trigger type (e.g. "timer", "pressure", "motion sensor").
• yield – optional – for explosive shells, the yield (in tons of TNT) of the device.

Production history

• designer – optional – the person or group responsible for designing the cartridge.
• design_date – optional – the date (usually given as a year) when the cartridge was designed.
• manufacturer – optional – the manufacturer of the cartridge.
• production_date – optional – the period (usually given in years) when the cartridge was produced.
• variants – optional – any variant models of the cartridge.

Service history

• service – optional – the period (usually given in years) when the cartridge was in service.
• used_by – optional – the countries, armed forces, or other groups using the cartridge; this may be omitted for cartridges employed only in their country of origin.
• wars – optional – any wars during which the cartridge saw service.

Ballistic performance

Ballistic data for up to five different weight bullets can be specified; it may be provided in either SI or Imperial units, but this choice must be consistent for all five sets. The x in the field name should be replaced with 1–5 as displayed in the template format shown above (e.g. bw1, bw2, btype1, btype2, vel1, vel2, en1, en2, etc.):

• bwx – optional – the weight of the bullet for given data, expressed in grams or grains; only include the number, and not the units of measurement.
  • btypex – optional – the type of bullet (e.g. JHP, FMJ, BHP, ect.).
  • velx – required if bw field is specified – velocity of the bullet at the muzzle, expressed in m/s or ft/s; only include the number, and not the units of measurement, and omit any commas.
  • enx – required if bw field is specified – energy of the bullet at the muzzle, expressed in J or ft·lbf; only include the number, and not the units of measurement, and omit any commas.
• test_barrel_length – optional – the length of the barrel used when generating the ballistics data.
• balsrc – optional – the source from which the ballistics data was obtained.

Cite error: <ref> tags exist, but no <references/> tag was found